ADLINK Technology MI-960, User Manual

Page: 58 / 98

44 BIOS Setup
4.3.4 APM / Resume Event Configuration
You can use this screen to select options for APM/Resume Event
Configuration. Use the up and down < Arrow > keys to select an
item. Use the < + > and < - > keys to change the value of the
selected option.
APM Configuration
Power Button Mode
This option specifies the effect when the power button pressed
(On, Off, or Suspend).
X
On/Off:
System go into power down mode when power but-
ton pressed.
X
Suspend:
System go into suspend mode when power but-
ton pressed.
Advanced Resume Event Controls
Resume On PME#
This field specifies if a RI/PCI PME# event will generate a sys-
tem wake event. The options are Enabled and Disabled.
Resume On RTC Alarm
Allows you to enable or disabled the RTC to generate a wake
event. When this item is set to Enabled, the item RTC Alarm
Date, RTC Alarm Hour, RTC Alarm Minute, and RTC Alarm
Second appear with set values.
Restore on AC Power Loss
Determines which state the computer enters when AC power is
restored after a power loss. The options for this value are Last
State, Power On and Power Off.
X
Power Off:
Set this value to always power off the system
while AC power is restored.
X Power On:
Set this value to always power on the system
while AC power is restored.
X Last State:
Set this value to power off/on the system
depending on the last system power state while AC power
is restored.