ADLINK Technology MI-960, User Manual

Page: 45 / 98

Getting Started 31
MI-960
3.2 Memory Module Installation
The MI-960 supports up to 4 GB of DDR2 533/667/800 SDRAM in
two 240-pin DIMM sockets. The DDR2 memory modules are
notched to facilitate correct installation in the DIMM sockets.
X
It is recommended that you install DIMMs with the same
CAS latency. For maximum compatibility, install memory
modules with the same brand, model, and/or rating.
To install a memory module:
1. Locate the DIMM slots on the motherboard.
2. Press the socket’s retaining clips outward to unlock.
3. Align the memory module on the socket making sure
that the notch matches the break on the socket.
WARNING:
Disconnect all power supply to the board before installing a
memory module to prevent damaging the board and mem-
ory module .
Break
Notch