manualshive.com logo in svg

ADLINK Technology LitleBoard 800, Reference Manual

Share
Download
ADLINK Technology LitleBoard 800 Reference Manual Download Page 47

LittleBoard 800

Reference Manual

41

Appendix A

Technical Support

ADLINK Technology, Inc. provides a number of methods for contacting Technical Support listed in the 

Table A-1

 below. Requests for support through the Ask an Expert are given the highest priority, and usually 

will be addressed within one working day. 

•

Ampro by ADLINK Ask an Expert – This is a comprehensive support center designed to meet all your 
technical needs. This service is free and available 24 hours a day through the Ampro By ADLINK web 

site at 

http://ampro.custhelp.com

. This includes a searchable database of Frequently Asked Questions, 

which will help you with the common information requested by most customers. This is a good source 
of information to look at first for your technical solutions. However, you must register online if you 

wish to use the Ask a Question feature.

•

Personal Assistance – You may also request personal assistance by creating an Ask an Expert account 
and then going to the Ask a Question feature. Requests can be submitted 24 hours a day, 7 days a week. 
You will receive immediate confirmation that your request has been entered followed by an e-mail 

response. Once you have submitted your request, you must log in to My Stuff where you can check 

status, update your request, and access other features.

•

InfoCenter – This service is also free and available 24 hours a day at the Ampro By ADLINK web site 
at 

http://www.ampro.com

. However, you must sign up online before you can log in to access this 

service. The InfoCenter was created as a resource for embedded system developers to share ADLINK’s 

knowledge, insight, and expertise. This page contains links to White Papers, Specifications, and 
additional technical information. 

Table A-1.   Technical Support Contact Information

Method

Contact Information

Ask an Expert

http://ampro.custhelp.com

Web Site

http://www.ampro.com

Standard Mail

ADLINK Technology, Incorporated
5215 Hellyer Avenue 
San Jose, CA 95138-1007, USA

Summary of Contents for LitleBoard 800



















































Reviews:

No comments

Brands by name

Popular brands

Load more brands