ADLINK Technology Express-KL2, User Manual

Page: 23 / 96

Express-KL2
Pinouts and Signal Descriptions
17
3.3.8. LPC Bus
Signal Pin # Description I/O PU/PD Comment
LPC_AD[0:3] B4-B7 LPC multiplexed address, command and
data bus
I/O 3.3V Chipset has internal
pull-up
LPC_FRAME# B3 LPC frame indicates the start of an LPC cycle O 3.3V
LPC_DRQ0#
LPC_DRQ1# B8
B9 LPC serial DMA request I 3.3V Not supported
LPC_SERIRQ A50 LPC serial interrupt I/O OD
3.3V PU 10k
3.3V
LPC_CLK B10 LPC clock output –33MHz nominal O 3.3V
3.3.9. USB
Signal Pin # Description I/O PU/PD Comment
USB0+
USB0- A46
A45 USB differential data pairs for Port 0 I/O
3.3VSB USB 1.1/ 2.0
compliant
USB1+
USB1- B46
B45 USB differential data pairs for Port 1 I/O
3.3VSB USB 1.1/ 2.0
compliant
USB2+
USB2- A43
A42 USB differential data pairs for Port 1 I/O
3.3VSB USB 1.1/ 2.0
compliant
USB3+
USB3- B43
B42 USB differential data pairs for Port 2 I/O
3.3VSB USB 1.1/ 2.0
compliant
USB4+
USB4- A40
A39 USB differential data pairs for Port 3 I/O
3.3VSB USB 1.1/ 2.0
compliant
USB5+
USB5- B40
B39 USB differential data pairs for Port 4 I/O
3.3VSB USB 1.1/ 2.0
compliant
USB6+
USB6- A37
A36 USB differential data pairs for Port 5 I/O
3.3VSB USB 1.1/ 2.0
compliant
USB7+
USB7- B37
B37
USB differential data pairs for Port 6
I/O
3.3VSB USB 1.1/ 2.0
compliant
USB_0_1_OC# B44 USB over-current sense, USB ports 0 and
1. A pull-up for this line shall be present on
the module. An open drain driver from a
USB current monitor on the carrier board
may drive this line low. I 3.3VSB PU 10k
3.3VSB Do not pull high on
carrier
USB_2_3_OC# A44 USB over-current sense, USB ports 2 and
3. A pull-up for this line shall be present on
the module. An open drain driver from a
USB current monitor on the carrier board
may drive this line low. . I 3.3VSB PU 10k
3.3VSB Do not pull high on
carrier
USB_4_5_OC# B38 USB over-current sense, USB ports 4 and
5. A pull-up for this line shall be present on
the module. An open drain driver from a
USB current monitor on the carrier board
may drive this line low. I 3.3VSB PU 10k
3.3VSB Do not pull high on
carrier
USB_6_7_OC# A38 USB over-current sense, USB ports 6 and
7. A pull-up for this line shall be present on
the module. An open drain driver from a
USB current monitor on the carrier board
may drive this line low. I 3.3VSB PU 10k
3.3VSB Do not pull high on
carrier