ADLINK Technology DMI-1210 User Manual Download

Page: 69 / 103

DMI-1210

Hotkey Descriptions

Enter

The < Enter > key allows you to display or change the setup

option listed for a particular setup item. The < Enter > key

can also allow you to display the setup sub-screens.

The < F1 > key allows you to display the General Help

screen. Press the < F1 > key to open the General Help

screen.

The < F2 > key on your keyboard is the previous values key.

It is not displayed on the key legend by default. To set the

previous values settings of the BIOS, press the < F2 > key

on your keyboard. It is located on the upper row of a stan-

dard 101 keyboard. The previous values settings allow the

motherboard to boot up with the least amount of options set.

This can lessen the probability of conflicting settings.

Summary of Contents for DMI-1210








































































































Search results

Summary of Contents for DMI-1210

Reviews:

Related manuals for DMI-1210

Brands by name

Popular brands

ADLINK Technology DMI-1210, User Manual

Search results

Summary of Contents for DMI-1210

Reviews:

Related manuals for DMI-1210

Brands by name

Popular brands