ADLINK Technology cPCI-3938, Manual

Page: 12 / 35

6
•
Installation
Inspect the module carton for obvious damage. Shipping and handling
may cause damage to your module. Be sure there are no shipping and
handing damages on the module before processing.
After opening the module carton, extract the system module and place it
only on a grounded anti-static surface component side up.
Again inspect the module for damage. Press down on all the socket IC's
to make sure that they are properly seated. Do this only with the module
place on a firm flat surface.
Note: DO NOT APPLY POWER TO THE CARD IF IT HAS BEEN
DAMAGED.
You are now ready to install your cPCI module.
2.3 Installation Procedure
1. Turn off your computer
2. Turn off all accessories (printer, modem, monitor, etc.) connected to
computer.
3. Select a cPCI expansion slot.
4. Before handling the serial communication module, discharge any
static buildup on your body by touching the metal case of the
computer. Hold the edge and do not touch the components.
5. Position the board into the cPCI slot you selected.
6. Secure the card in place of the system.