ADLINK Technology cPCI-3938, Manual

Page: 17 / 35

Installation
•
11
6. Choose the “Add a Supported Product” item, and then select “Install
one or more packages” item.
How many cards can be installed?
Enter 1-2 or enter q to quit:
7. Please strike the numeric key 1 to 2 to continue the installation
procedure.
Updating system configuration.
Making terminal device 100%.
Editing terminal definitions 100%.
Installing serial communication card driver.
You must create a new kernel to effect the driver change to your
specified.
Do you wish to create a new kernel now? (y/n)
8. Now strike “n” key if you want to quit this procedure, or “y” key to
continue the procedure.
9. From this procedure, the screen message and installation procedure
will be different for XENIX and UNIX system.
In XENIX system:
Re-linking the kernel.
Kernel with driver modifications is in /usr/sys/conf/xenix
Do you want this kernel to reboot by default? (y/n) y
The new kernel is installed in /xenix.
Reboot your system to activate it.
#
In UNIX system:
The UNIX operating system will now be rebuild.
This will take a few minutes. Please wait.
The UNIX Kernel has been rebuilt
10. At sight of the above message, you can assure that you have
finished your installation. At this moment, please shutdown the
operating system and reboot it.
After restarting the new kernel, the IO processor will indicate as follows:
PCIIOP: unit = 0 type = P960F bus = 0 dev = 0 fun = 0 map = 0xF4000000 :
8KB
Downloading PCIIOP card(s) ……