ADLINK Technology CoreModule 430 Reference Manual Download | Manualshive

Page: 53 / 56

background image

CoreModule 430

Reference Manual

47

Appendix A

Technical Support

ADLINK Technology, Inc. provides a number of methods for contacting Technical Support listed in the

below. Requests for support through the Ask an Expert are given the highest priority, and usually

will be addressed within one working day.

•

ADLINK Ask an Expert – This is a comprehensive support center designed to meet all your technical
needs. This service is free and available 24 hours a day through the Ampro By ADLINK web page at

http://www.adlinktech.com/AAE/

. This includes a searchable database of Frequently Asked Questions,

which will help you with the common information requested by most customers. This is a good source
of information to look at first for your technical solutions. However, you must register online if you

wish to use the Ask a Question feature.

ADLINK strongly suggests that you register with the web site. By creating a profile on the ADLINK
web site, you will have a portal page called “My ADLINK” unique to you with access to exclusive

services and account information.

•

Personal Assistance – You may also request personal assistance by creating an Ask an Expert account
and then going to the Ask a Question feature. Requests can be submitted 24 hours a day, 7 days a week.
You will receive immediate confirmation that your request has been entered. Once you have submitted

your request, you must log in to go to the My Question area where you can check status, update your

request, and access other features.

•

Download Service – This service is also free and available 24 hours a day at

http://www.adlinktech.com

. For certain downloads such as technical documents and software, you must

register online before you can log in to this service.

Table A-1. Technical Support Contact Information

Method

Contact Information

Ask an Expert

http://www.adlinktech.com/AAE/

Web Site

http://www.adlinktech.com

Standard Mail

Contact us should you require any service or assistance.

ADLINK Technology, Inc.

Address: 9F, No.166 Jian Yi Road, Zhonghe District

New Taipei City 235, Taiwan

ᄅקؑխࡉ೴৬ԫሁ

166

ᇆ

9

ᑔ

Tel:

+886-2-8226-5877

Fax:

+886-2-8226-5717

Email: [email protected]

Ampro ADLINK Technology, Inc.

Address: 5215 Hellyer Avenue, #110, San Jose, CA 95138, USA
Tel:

+1-408-360-0200

Toll Free: +1-800-966-5200 (USA only)
Fax:

+1-408-360-0222

Email: [email protected]

ADLINK Technology (China) Co., Ltd.

Address:

Ϟ⍋Ꮦ⌺ϰᮄऎᓴ∳催⾥ᡔುऎ㢇᯹䏃

300

ো

(201203)

300 Fang Chun Rd., Zhangjiang Hi-Tech Park,
Pudong New Area, Shanghai, 201203 China

Tel:

+86-21-5132-8988

Fax:

+86-21-5132-3588

Email: [email protected]

«
...
51
52
53
54
55
...
»

Summary of Contents for CoreModule 430

























































Reviews:

No comments

Related manuals for CoreModule 430

Brand: Yamaha Pages: 497

Brand: Garelick Pages: 3

Brand: Actel Pages: 2

SuperServer SYS-E102-9AP-LN4-C

Brand: Supermicro Pages: 81

Brand: IBASE Technology Pages: 64

B85M-P32 series

Brand: MSI Pages: 186

Brand: AXIOMTEK Pages: 67

Brand: PRIZM Pages: 9

STEVAL-PLC001V1

Brand: ST Pages: 42

880GM-LE - V1.0

Brand: ASROCK Pages: 60

Brand: SELVA MARINE Pages: 35

Brand: Mach Pages: 86

X99A WORKSTATION

Brand: MSI Pages: 97

Brand: Gigabyte Pages: 112

Brand: YASKAWA Pages: 28

Digital Alpha VME 4/224

Brand: DEC Pages: 442

Brand: TYAN Pages: 74

Brand: TYAN Pages: 59

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands