AmITX-BT-I
Page 9
2.4.
Form Factor
¾
Mini-ITX
: 170mm x 170mm
2.5.
SEMA Board Controller
¾
ADLINK Smart Embedded Management Agent (SEMA)
•
Voltage/Current monitoring
•
Power sequence debug support
•
AT/ATX mode control
•
Logistics and Forensic information
•
Flat Panel Control
•
General Purpose I2C
•
Failsafe BIOS (dual BIOS )
•
Watchdog Timer and Fan Control
2.6.
Debug Header
¾
40-pin Multipurpose Flat Cable Connector:
, used in combination with DB-40 debug module providing BIOS POST code LED, BMC
access, SPI BIOS flashing, Power Testpoints, Debug LEDs
2.7.
Video
¾
GPU Feature Support:
7th generation graphics Intel core architecture with four execution units supporting two independent displays
•
3D graphics hardware acceleration
•
Support for DirectX11, OCL 1.1, OGL ES Halt/2.0/1.1, OGL 3.2
•
Video decode hardware acceleration including support for H.264, MPEG2, VC-1, WMV and VP8 formats
•
Video encode hardware acceleration including support for H.264, MPEG2 and MVC formatsPlayback of Blu-ray disc S3D content
using HDMI (1.4a spec compliant with 3D)
Note:
Availability of features may vary between operating systems.
¾
Display Interface support
•
VGA:
Analog VGA supporting resolutions up to 2560x1600 x24bpp at 60 Hz
•
HDMI:
HDMI 1.3a
•
LVDS:
Supports non-EDID type LCD panels only
,
Single/Dual Channel 18 and 24-bit, supports 1920 x 1200 at 60 Hz resolution in
dual LVDS bus mode
2.8.
Audio
¾
Integrated:
Intel® HD Audio integrated in SOC
¾
Audio Codec:
ALC886
2.9.
LAN
¾
Intel MAC/PHY:
Intel® i211AT (MAC/PHY) Ethernet controller
¾
Interface:
10/100/1000 GbE connection
2.10.
Power Specification
¾
Power Modes:
AT and ATX mode (AT mode start controlled by BMC)
¾
Standard Voltage Input:
ATX = 12V ±5%, 5Vsb ±5% or AT = 12V ±5%
¾
Power Management:
ACPI
4.0
compliant
¾
Power States:
Supports C1-C6, S0, S1, S4, S3, S5, (Wake-on-USB S3/S4, WoL S3/S4/S5)
