ADLINK Technology AmITX-BT-I User Manual Download

Page: 21 / 68

AmITX-BT-I

Page 21

4.1.7.

Audio Connectors (Line-out, Mic-in)

Note:

Shared with onboard Audio Header; un-amplified codec output.

4.2.

Internal Connectors

4.2.1.

ATX Power Connector (ATX_PWR, proprietary)

AmITX-BT-I supports a proprietary internal ATX Power Connector (ATX_PWR). An adapter cable is provided for connection to a standard

ATX power supply.

Note:

Either the DC Power Inlet or the internal ATX Power Connector (ATX_PWR) must be used to supply the motherboard with +12V ±5%.

Pin #

Signal

Pin #

Signal

1 SB5V 8 P_OK

2 GND 9 PS_ON#

3 GND 10

+12V

4 GND 11

+12V

5 GND 12

+12V

6 GND 13

+12V

7 3.3V 14

+5V

CAUTION

Only connect ONE power supply to the board. Connecting power to both the 12V DC-inlet and the internal ATX Power

Connector may damage the board.

Jack

Contact

Signal

Tip FRONT-OUT-L

Ring FRONT-OUT-R

Line-out

Sleeve GND

Tip MIC1-L

Ring MIC1-R

Mic-in

Sleeve GND

Summary of Contents for AmITX-BT-I





































































Search results

Summary of Contents for AmITX-BT-I

Reviews:

Related manuals for AmITX-BT-I

Brands by name

Popular brands

ADLINK Technology AmITX-BT-I, User Manual

Search results

Summary of Contents for AmITX-BT-I

Reviews:

Related manuals for AmITX-BT-I

Brands by name

Popular brands