ADLINK Technology AmITX-BT-I, User Manual

Page: 27 / 68

AmITX-BT-I Page 27
4.2.9. LVDS Connector
FFC Connector : Female, 30pin, 1mm pitch. (JAE, FI-X30SSLA-HF)
Supports non-EDID type LCD panels.
Signal Description
LVDS A0..A3 LVDS A Channel data
LVDS ACLK LVDS A Channel clock
LVDS B0..B3 LVDS B Channel data
LVDS BCLK LVDS B Channel clock
VDD ENABLE Output Display Enable.
LCDVCC VCC supply to the display. Power-on/off
sequencing depending on selected display type
in the BIOS Setup.
Switchable by jumper either 3.3V (default) or 5V.
Maximum load is 1A total for both voltages.
DDC CLK DDC Channel Clock
DDC DAT DDC Channel Data
Note Type Signal Pin # Pin # Signal Type Note
LVDS LVDS A0- 1 16 LVDS B1+ LVDS
LVDS LVDS A0+ 2 17 POWER GND PWR Max. 0.5A
LVDS LVDS A1- 3 18 LVDS B2- LVDS
LVDS LVDS A1+ 4 19 LVDS B2+ LVDS
LVDS LVDS A2- 5 20 LVDS BCLK- LVDS
LVDS LVDS A2+ 6 21 LVDS BCLK+ LVDS
Max. 0.5A PWR POWER GND 7 22 LVDS B3- LVDS
LVDS LVDS ACLK- 8 23 LVDS B3+ LVDS
LVDS LVDS ACLK+ 9 24 POWER GND PWR Max. 0.5A
LVDS LVDS A3- 10 25 DDC DATA OT PU 2K2 Ω , 3.3V
LVDS LVDS A3+ 11 26 VDD ENABLE OT 3.3V level
LVDS LVDS B0- 12 27 DDC CLK OT PU 2K2 Ω , 3.3V
LVDS LVDS B0+ 13 28 LCDVCC PWR Max 0.5A
Max. 0.5A PWR POWER GND 14 29 LCDVCC PWR Max 0.5A
LVDS LVDS B1- 15 30 LCDVCC PWR Max 0.5A