ADLINK Technology ACL -6128, User Manual

Page: 27 / 34

High-Level Programming
•
19
4
High-Level Programming
A high-level C language programming interface of ACL-6128 is
described in this chapter. You can base on the C library to develop your
own applications easily and fast.
Only three C-language functions are supported by the software library.
The functionality of these function calls can be classified to the following
capabilities,
1. Initialization:
setups the hardware base I/O address and switches different cards
2. D/A conversion:
performs digital to analog conversion
In addition to the library, some demonstration programs are also
provided: You can refer it and save a lot of programming time and get
some other benefits as well.
4.1 Installation
To install the DOS library software and utilities, please follow the
following installation procedures:
1. Put ADLINK CD into the appropriate CD-ROM drive.
2. Type the following commands to change to the card’s directory ( X
indicates the CD-ROM drive):
X :\>
CD \NuDAQISA\6128
3. Execute the setup batch program to install the software:
X :\NuDAQISA\6128>
SETUP