ADJ REV186 User Manual Download Page 2

©2020 ADJ Products, LLC all rights reserved. Information, specifications, diagrams, images, and 

instructions herein are subject to change without notice. ADJ Products, LLC logo and identifying 

product names and numbers herein are trademarks of ADJ Products, LLC. Copyright protection 

claimed includes all forms and matters of copyrightable materials and information now allowed by 

statutory or judicial law or hereinafter granted. Product names used in this document may be trade-

marks or registered trademarks of their respective companies and are hereby acknowledged. All 

non-ADJ Products, LLC brands and product names are trademarks or registered trademarks of their 

respective companies.

ADJ Products, LLC and all affiliated companies hereby disclaim any and all liabilities for property, 

equipment, building, and electrical damages, injuries to any persons, and direct or indirect economic 

loss associated with the use or reliance of any information contained within this document, and/or as 

a result of the improper, unsafe, unsufficient and negligent assembly, installation, rigging, and opera-

tion of this product.

Europe Energy Saving Notice

Energy Saving Matters (EuP 2009/125/EC)

Saving electric energy is a key to help protecting the enviroment. Please turn off all electrical products when 

they are not in use. To avoid power consumption in idle mode, disconnect all electrical equipment from power 

when not in use. Thank you!

ADJ Products, LLC  -  www.adj.com  - Revo 4 IR User Manual Page 2

Summary of Contents for REV186



















Reviews: