ADJ Products, LLC - www.adj.com - Revo 4 IR User Manual Page 11
Universal DMX Control: This function allows you to use a univer- sal DMX-512 controller. A DMX
controller allows you to create unique programs tailored to your individual needs.
1. The Revo 4 IR has 4 DMX channel mode and a 256 DMX channel mode. To set the channel mode
see the System Menu section. See the DMX Channel Mode sections for detailed descriptions of
the DMX traits.
2. To control your fixture in DMX mode, follow the set-up procedures in the Set Up section as well
as the set-up specifications that are included with your DMX controller.
3. Use the controller’s faders to control the various DMX fixture traits.
4. This will allow you to create your own programs.
5. Follow the instructions in the System Menu section to set the DMX address.
6. For longer cable runs (more than a 100 feet) use a terminator on the last fixture.
7. For help operating in DMX mode consult the manual included with your DMX controller.
Sound Active Mode: This mode allows either single unit or several units linked together, to run to
the beat of the music.
1. Press the MENU button until “SOUN” is displayed, and press ENTER. Press the UP or DOWN
buttons so that “ON” is displayed and press ENTER.
2. Press the MENU button until “SENS” is displayed, and press ENTER. Use the UP and DOWN
buttons to adjust the sound sensitivity. Press ENTER when you have found your desired
sensitivity level.
Show Mode: This mode allows a single unit or several units linked together, to run 1 of 12 light
shows. Show mode can be run with sound active mode on or off.
1. Press the MENU button until “SHND” is displayed, and press ENTER.
2. Press the UP or DOWN buttons until you find your desired show, and press ENTER to confirm.
Revo 4 IR
Operation