13
OPERATING INSTRUCTIONS
LCD Set Up: In this submenu, you are able to adjust the settings for the LCD display. You can pro-
gram the display to blackout after 30 seconds, lock the buttons, or make the display flash.
1. Plug the fixture in and press the UP or DOWN buttons until “Menu Function” is displayed. Press
ENTER to select.
2. Press the UP or DOWN buttons to scroll to “LCD.Set” and press ENTER.
3. Use the UP or DOWN buttons to make your desired adjustments in each submenu. Press the
ENTER button to move to the next adjustment submenu.
4. Press the MODE button to exit and return to the main menu.
NOTE: This fixture features two variations of the control panel lockout, as described below. These
can be selected from the main system menu, by navigating to MENU Function > LCD Set > Key
Lock.
• When Display sub menu is set to ON, the LCD display backlight will turn OFF after 30 seconds. At
this point, the Control Panel buttons will lock, and the display will show Locked. To unlock, press
and hold the MODE button for 5 seconds.
• When Display sub menu is set to ON1, the LCD display backlight will turn OFF after 30 seconds.
At this point, the Control Panel will lock, and the display will show LOCKED*****. To unlock, press
UP, DOWN, UP, DOWN, ENTER, in that order. With each button press, one * will disappear from
the display until the display unlocks.
Unit Temperature: With this function, you can switch the temperature display between Celsius or
Fahrenheit.
1. Plug the fixture in and press the UP or DOWN buttons until “Menu Function” is displayed. Press
the ENTER button.
2. Press the UP or DOWN buttons to scroll to “TEMP” and press ENTER.
3. Use the UP or DOWN buttons to switch between “Celsius” or “Fahren”.
4. Press ENTER to confirm your selection or press the MODE button to exit and return to the main
menu.
Dimmer Curve Setting:
1. Plug the fixture in and press the UP or DOWN buttons until “Menu Function” is displayed. Press
the ENTER button.
2. Use the UP or DOWN buttons to scroll to “DimCurve” and press ENTER.
3. There are 6 dimmer curve settings to choose from. Use the UP and DOWN buttons to scroll
through the different dimmer curve setting. Please refer to the Dimmer Curve Chart section of
this manual for detailed information on dimmer curves.
4. Press the MODE button to exit and return to the main menu.
Display Set Up: In this submenu, you are able to select what main display will show. In this sub-
menu you are able to designate the unit as the “Secondary” in Primary-Secondary mode.
1. Plug the fixture in and press the UP or DOWN buttons until “Menu Function” is displayed. Press
the ENTER button.
2. Press the UP or DOWN buttons to scroll to “Disp.Set” and press ENTER.
3. Use the UP or DOWN buttons to find you desired setting and press ENTER.
4. Press the MODE button to exit and return to the main menu.