Nitrogen flowrate
adjustment
B 50
Inert gas purge connection
(G version)
Gas line connection
■
For optimum performances -ball bearing protection-, the nitrogen
supply should have the following characteristics:
- Maximum moisture rate: 5 ppm of water
- Dust < 1pm
- Oil <0.1 ppm
- Pressure:1.5 bar absolute (before the gas pressure reducing valve,
customer supply)
■
Connect the gas line supply to the R 1/4 connector provides on
purpose with flexible or stainless steel pipe (customer supply).
■
For optimum ball bearing protection, the neutral gas pressure
must be set to 0.3 bar (relative pressure) according to the flowrate
value given in the table below:
Alcatel Vacuum Technology France - Manuel de l'Utilisateur - ACP 15 / 28 / 40 Series 2
1/1
Summary of Contents for ACP 15
