adiva AD3 200, User Manual, Page: 92 / 148

TRANMISSION FLUID CHANGE
•
Park your Vehicle on the centre stand on level ground in a well ventilated area
•
If your engine is Hot, wait for it to return to normal temperature before operation
•
We recommend you wear protective gloves when handling liquids
• Place a suitable container (± 1 litre) under the drain plug (E), Remove the refill
plug (F)
•
Open the drain plug (E) (counter-clockwise) with a suitable wrench
•
Slowly turn the drain plug till the fluid starts to trickle out, when the flow is
stablised, you may remove the whole drain plug and allow the oil to drain
completely
•
Inspect the drain plug and washer, clean with a rag, replace and tighten to
specified torque (0.8 ~ 1.2 kgf-m or 69 ~ 104 lbf-in)
•
Add Fluid ( SAE90 )*
see below
through the refill according to the amounts listed
and replace the refill plug and tighten to specified torque (0.8 ~ 1.2 kgf-m or 69 ~
104 lbf-in)
TRANSMISSION FLUID TYPE:
SAE 90
TRANSMISSION FLUID CAPACITY: 0.23L
TRANSMISSION FLUID CHANGE CAPACITY: 0.21L
17
Caution: Use only a specified viscosity and high quality Transmission
Fluid. Use of unspecified fluids can seriously damage your
engine's transmission and components! If you are unsure how to
change the fluid, do not attempt this operation. Bring to your
nearest Authorised ADIVA dealer or Workshop.
E
F