Ender 3 Belt Kit assembly manual
P a g e
9 | 43
✓
Remove cable from the back of the screen, please be aware of the connector position,
since it will be connected later.
Figure 11 disconnecting screen
✓
Using an Allen key, remove 2 x m5 screws that holds screen in place.
✓
Save both, screen assembly and screws for later use.
Figure 12 Removing screen
Step 2.8
Y axis and heatbed assembly
✓
Using an Allen key, remove 2 x m5 screws that holds Y axis system with heatbed
assembly.
✓
Save Y axis and heatbed assembly for later use, discard 2 x m5 screws.
