AD1000 User’s Manual
- 67 -
2.
Set these parameters in the parameters analysis part. In the ralative edit
frame, enter value needed or press[default value] revert the default value.
Fig 11.8 Parameters analysis edit frame
3.
Press [application] to save setting and then quit setting surface; If press
[cancel], it will quit without setting saved.
Analysis detecting threshold just set will used for trace tested after
the set and reanalysis of the trace.
11.17 Reanalyze the trace
User can reanalyze the trace. Reanalyze the trace has follow effects:
Ø
Create new event sheet for trace
Ø
Reanalyze the trace got by the software of latest version
Ø
Re-found the original event sheet( if the event sheet has been modified)
Application program will analyze the newest tested trace. User can check the
analytic result in the event options
Reanalyze the trace:
1.
In the [event] options, press [analysis], it will reanalyze the whole trace
2.
After analysis finished, the new analytic result will be listed in the event
sheet.
