AD1000 User’s Manual
- 62 -
11.14.1 Display the event on the trace and locate event in even
sheet
Through rolling the event sheet, user can check the relative info about all events
tested on the trace. When an event selected, there will be Markers appear on the
trace which above the event.
u
When the trace under magnification status, event and its Markers may not
in the current window.
u
It is better to locate event under whole trace status and then magnify to see
the detail.
11.14.2 Add Event
User can insert event into event sheet at any time manually. For example, when
there is a splice point on some given position, but as it hidden in the noise or the
splice loss lower than the minimum value of non-reflection detecting threshold, then
the analysis didn’t test that point, this operation will be quite useful. User can
manually add this event to the event sheet. This will add a number on the insertion
position but won’t modify the trace.
Important hint: When reanalyze the trace; the inserted event will be removed.
Add event:
1.
Press[add] on {Event} label
