2012-03-29 Manual Q-8V100 and S-25A30 Rev. 0.1
preliminary
17
6. DETAILED FUNCTIONALITY & CONTROL
DESCRIPTIONS
6.1. Camera Identification
The camera identification string can be queried by the following command:
Command Syntax:
ID?
Return message:
“Q-8V100x/CL S/N:yyyyyy
“S-25A30x/CL S/N:yyyyyy
Here x indicates the type: “m” for monochrome or “c” for (bayer) color.
yyyyyy is the serial number of the camera.
The serial number can be queried individually by:
Command Syntax:
SN?
Return message:
“yyyyyy
Where yyyyyy is again the serial number.
Furthermore, the camera link Build State can be queried by:
Command Syntax:
BS?
Return message:
“x.xx;y.yy;z,zz
x.xx is the camera issue
y.yy is the micro controller firmware version
z.zz is the FPGA firmware version.
6.1.1. Internal temperature
Command Syntax:
TM?
The internal temperature is returned in units of 1
0
C.
6.2. Camera configuration sets
The factory default values of all settings are restored by:
Command Syntax:
FD
In addition, user settings can be stored by:
Command Syntax:
SC
The settings stored in the user set are loaded all at once by:
Command Syntax:
LC
The camera can be rebooted by: