ADIC Tape Array 5, User Manual

Page: 14 / 46

4
Introduction
Power Supplies
Two redundant hot-swappable 300-watt power supplies provide operating voltages for the DLT tape drives
installed in the T5 Enclosure. The two supplies operate in parallel using proprietary power control and
sharing modules. Each supply plugs into the rear of the T5 and can be removed or replaced while the other
supply keeps the system fully operational. There is a normally green indicator on the T5 rear panel, at the top
of each power supply module, which extinguishes whenever the associated power supply fails, is turned off,
or is removed from the chassis.
Figure 1-3: T5 Rear Panel
Power Supplies