BEFORE USE
HANDLING OF THE PACKED MACHINE
The machine is supplied with suitable packing foreseen for fork lift
truck handling.
brushes base 66: the total weight is 363kg (800 lbs.).
brushes base 80: the total weight is 368kg (811 lbs.).
Packing dimensions:
Base:
161 cm x 87 cm (63"x34")
Height:
123 cm (48")
Do not place more than 2 packings on top of each other.
UNPACKING OF THE MACHINE
1.
Remove the external packing.
2.
Unscrew the brackets (1) that secure the machine to the pallet.
3.
Provide for an inclined base.
4.
Move the machine backwards, as indicated in the figure, avoiding
heavy contacts to mechanical parts.
5.
Keep the pallet and the brackets for eventual transport.
ACCESS TO THE BATTERY COMPARTMENT
To reach the battery compartment, first of all make sure that the
recovery tank (1) is empty by opening the cover (2).
If the tank is full, proceed as indicated under “RECOVERY TANK
CLEANING”, otherwise take off the squeegee hose (3) and lift the tank.
Thanks to a blocking system of 2 levels, the machine allows the battery
charging with a partial tank opening.
BATTERY INSTALLATION
The machine is equipped either with batteries in serial connection or
elements of DIN-type assembled together and connected in series,
placed in its appropriate compartment under the recovery tank and
must be handled using suitable lifting equipment (due to weight,
considering the type of batteries chosen, and coupling system).
The batteries must be in accordance with CEI 21-5 Norms.
The machine foresees the standard use of traditional lead/acid batteries.
CHECK SETTING ON THE INDICATOR (see under paragraph "BATTERIES
CHARGE LEVEL INDICATOR").
In case of GEL or AGM batteries installation, it is necessary TO MODIFY
THE SETTING (see under “TO CHANGE THE BATTERY SETTINGS”).
Strictly follow manufacturer/distributor indications for the
maintenance and recharge of the batteries. All installation and
maintenance operations must be executed by specialized staff, using
suitable protection accessories.
BATTERY CHARGER
Be sure that the battery recharger is suitable for the installed
batteries both for their capacities and type (lead/acid or GEL or
AGM).
In the plastic bag containing the use and maintenance you will find the
coupling connector for the recharger. It must be assembled onto the
cables of your recharger, following the instructions given by the
manufacturer.
ON-BOARD BATTERY RECHARGER (OPTIONAL)
If the machine is equipped with the on-board battery recharger (see
under "OPTIONAL ACCESSORIES”) please refer to the instructions of the
constructor of this accessory what the recharging operations concern.
The battery recharger is connected directly to the battery poles.
During the recharging operations a device is activated which does not
permit the machine's functioning.
The main cable of the battery recharger has a maximum length of two
meters and must be connected to a single-phase socket type CEE 7/7
9