Industrial
Electronic Devices
ADFweb.com Srl – IT31010 – Mareno – Treviso INFO:
www.adfweb.com
Phone +39.0438.30.91.31
User Manual
CAN Repeater
Document code: MN67401_ENG Revision 1.002 Page 3 of 16
CHARACTERISTICS:
The “
HD67401
,
HD67402
,
HD67403
,
HD67404
” series are rugged devices that can be located on cars, trucks, trains, boats and any other
machine that needs to isolate/ repeat a portion of CAN bus network (
CAN 2.0A
&
2.0B
,
CANopen
,
DeviceNet
,
J1939
,
NMEA2000
, and
generic
ISO11898
standard).
With his particular enclosure, equipped with four fixing lugs, makes available the mounting of the device in any plane surface (horizontal,
vertical, oblique).
It is possible to have the device varnished or totally resined and also in both cases with “Mini-Fit®” connectors or “AMP SuperSeal 1.5”
connectors. If is resined, the enclosure, like the “AMP SuperSeal 1.5" connectors, is waterproof (IP67).
The
HD67401-E4V
and
HD67401-E7R
for generic
CAN 2.0A & 2.0B
network.
The
HD67402-E4V
and
HD67402-E7R
are specific for
CANopen
network.
The
HD67403-E4V
and
HD67403-E7R
are specific for
DeviceNet
network.
The
HD67404-E4V
and
HD67404-E7R
are specific for
J1939/NMEA2000
network.
All the four series have these characteristics:
Triple 4kV isolation between Power Supply / CAN0 / CAN1;
Varnished / Resined (optionally);
Wide power supply input range: 8…26V AC | 10…40V DC;
Mini-Fit® / AMP SuperSeal 1.5 connectors;
Metal enclosure with fixing lugs;
Possibility to use Metal hose clamps for fixing it without using lugs;
Microprocessor for data control;
Programmable baudrate on both CAN sides;
Wide temperature range: -40°C / 105°C (-40°F / 221°F).
Why uses the products:
Isolate of a portion of CAN bus network;
Connect devices with different baudrates in the same network;
Extend a line segment without lowering the baudrate;
