Industrial
Electronic Devices
ADFweb.com Srl – IT31010 – Mareno – Treviso INFO:
www.adfweb.com
Phone +39.0438.30.91.31
User Manual
CAN Repeater
Document code: MN67401_ENG Revision 1.002 Page 8 of 16
CAN0/CAN1:
The connection of both CAN (CAN0 and CAN1) in the HD6740x-E4x-xxx
device must be made with a 3way MiniFit Female connector. The pinout of
Male Mini-Fit connector of the board is at right side of the page.
The connection of both CAN (CAN0 and CAN1) in the HD6740x-E7x-xxx
device must be made with a AMP SuperSeal 1.5 Male connector. The pinout
of Female connector of the board is at right side of the page.
The termination of both CAN (CAN0 and CAN1) line, with a 120Ω resistor, in
the HD67411-Exx-xxx is made internally of the device; when the order is
performed. If the device have the CAN0 terminated the code is the follow:
HD6740x-Exx-Yxx; otherwise is this other: HD6740x-Exx-Nxx. If the device
have the CAN1 terminated the code is the follow: HD6740x-Exx-xYx;
otherwise is this other: HD6740x-Exx-xNx.
Cable characteristics:
DC parameter:
Impedance
70 Ohm/m
AC parameters:
Impedance
120 Ohm/m
Delay
5 ns/m
Length
Baud Rate [bps]
Length MAX [m]
10 k
5000
20 k
2500
50 k
1000
100 k
650
125 k
500
250 k
250
500 k
100
800 k
50
1000 k
25
