Industrial
Electronic Devices
ADFweb.com Srl – IT31010 – Mareno – Treviso INFO:
www.adfweb.com
Phone +39.0438.30.91.31
User Manual
PROFIBUS Master / Modbus TCP Slave - Converter
Document code: MN67579_ENG Revision 2.002 Page 18 of 32
M
ODULE
S
ELECTION
:
The section “Module Selection” is used to select which
Modules are present in the Slave (Fig. 7).
In this section is possible to:
Check the list of the Modules selected (“Select
Modules”) (Fig. 7, point (1)) and the list of Modules
Available in GSD file (“Available Modules") (Fig. 7,
point (7));
Add a Module from the list of GSD file (Fig. 7, point
(6));
Remove a Module from selected list (Fig. 7, point
(5));
Add all Modules present in the GSD file (Fig. 7, point
(4));
Remove all Modules from selected list (Fig. 7, point
(3));
Insert a Module not present in the GSD file (“
Manual
Module
”) (Fig. 7 point (2)). For more info see the
section “Manual Module” below;
Enable the read of configuration directly from the
PROFIBUS Slave (“
Use module configuration
readed from device
”) (Fig 7, point (8)). If this
option is enable the configuration of the modules is
discorded
and
the
device
read
the
correct
configuration directly to the PROFIBUS slave.
Figure 7: “PROFIBUS Device – Module Selection” window
