ADF Web Modbus TCP Slave, User Manual

Page: 22 / 32

Industrial Electronic Devices
ADFweb.com Srl – IT31010 – Mareno – Treviso INFO: www.adfweb.com Phone +39.0438.30.91.31
User Manual
PROFIBUS Master / Modbus TCP Slave - Converter
Document code: MN67579_ENG Revision 2.002 Page 22 of 32
M
ODULE
P
ARAMETERS
:
The section “Module Parameters” is used to modify the parameters of the Modules (Fig. 11).
In this section there are:
The List of all Module selected in the GSD file
(“Available modules”) (Fig. 11, point (1));
The List of all Parameters available for the
Module selected (“Parameters of module”)
(Fig. 11, point (2));
The Configuration of all parameters in RAW
for the Module selected (“Parameters in RAW
(Hex)”) (Fig. 11, point(3));
The admited value for the selected parameter.
It is possible to select the value desired and
confirm it with the “
Apply ” button. If no value
appears in this table, the “Min Value” and
“Max Value” are the limit of the parameter.
(Fig. 11, point(4));
The “ Apply ” button is used to confirm the
new value of the parameter, the “ Default ”
button is used to load the factory value for
the parameter. In “
New Value ” edit box it is
possible to set the new value. (Fig. 11,
point(5));
Figure 11: “PROFIBUS Device – Module Parameters” window