ADF Web HD67F33-B2 Series, Manual

Page: 21 / 28

Industrial Electronic Devices
ADFweb.com S.r.l.
User Manual PROFINET Slave / LoRaWAN Gateway
Document code: MN67F33_ENG Revision 1.000 Page 21 of 28
Figure 4c: “Downlink Rules” table
The means of the fields in the window “Uplink Rules” are the following:
If the field “ Enable ” is checked, the LoRaWAN rule is enabled;
In the field “ Port ” the port used for LoRaWAN communication is defined;
In the field “ Start Byte ” the starting byte of the LoRaWAN message to write from PROFINET is defined;
In the field “ Number Bytes ” the number of consecutive bytes to write from starting byte is PROFINET;
If the field “ On Change ” is checked, the LoRaWAN message is sent only when the data from PROFINET change;
If the field “ On CMD ” is checked, the LoRaWAN message is sent when a PROFINET request is received (not used);
If the field “ On Timer ” is checked, the LoRaWAN message is sent cyclically with the delay defined in “ Time (ms) ” field;
In the field “ Position Byte ” the address of PROFINET array from which taking the data is defined;
In the field “ Mnemonic ” a description of the LoRaWAN rule is defined.