Industrial
Electronic Devices
ADFweb.com S.r.l.
User Manual
BACnet Slave / HART Master
Document code: MN67901_ENG Revision 1.000 Page 12 of 35
ETHERNET:
The updating of the converters and BACnet/IP communication must be made using Connector4 of the HD67901-XXXX-A1 with at least a
Category 5E cable. The maximum length of the cable should not exceed 100m. The cable has to conform to the T568 norms relative to
connections in cat.5 up to 100 Mbps. To connect the device to an Hub/Switch is recommended the use of a straight cable, to connect the
device to a PC/PLC/other is recommended the use of a cross cable.
