Industrial
Electronic Devices
ADFweb.com Srl – IT31010 – Mareno – Treviso INFO:
www.adfweb.com
Phone +39.0438.30.91.31
User Manual
CAN / Modbus Slave - Converter
Document code: MN67412_ENG Revision 2.101 Page 11 of 32
CAN:
The connection of the CAN in the HD67412-E4x-xxx device must be made with a 3way MiniFit
Female connector. The pinout of Male MiniFit connector of the board is at right side of the page.
The connection of the CAN in the HD67412-E7x-xxx device must be made with a AMP SuperSeal 1.5
Male connector. The pinout of Female connector of the board is at right side of the page.
The termination of CAN line, with a 120Ω resistor, in the HD67412-Exx-xxx is made internally of the
device; when the order is performed. If the device have the CAN terminated the code is the follow:
HD67412-Exx-Yxx; otherwise is this other: HD67412-Exx-Nxx.
Cable characteristics:
DC parameter:
Impedance
70 Ohm/m
AC parameters:
Impedance
120 Ohm/m
Delay
5 ns/m
Length
Baud Rate [bps]
Length MAX [m]
10 K
5000
20 K
2500
50 K
1000
100 K
650
125 K
500
250 K
250
500 K
100
800 K
50
1000 K
25
