19
unsanitary, but also it’s labels may slip off and obstruct the drain pipe.
Exterior Cleaning
The door and cabinet may be cleaned with a mild detergent and warm water solution such as 28g of
dish washing liquid mixed with 7.5L of warm water. Do not use solvent-based or abrasive cleaners. Use
a soft sponge and rinse with clean water. Wipe with a soft clean towel to prevent water spotting.
The side steel plate can discolor when exposed to chlorine gas and should be cleaned. Clean the steel
plate with a mild detergent and warm water solution and a damp cloth. Never use abrasive cleaning
agents.
Interior Cleaning
For Ice Storage Bin
The ice storage bin should be sanitized occasionally. Clean the bin before the ice maker is used for the
first time and reused after stopping for an extended period of time. It is usually convenient to sanitize
the bin after the ice making system has been cleaned, and the storage bin is empty.
1. Disconnect power to the unit.
2. Open the door and with a clean cloth, wipe down the interior with a sanitizing solution made of
28g of household bleach or chlorine and 7.5L of hot water (35
℃
to 46
℃
).
3. Rinse thoroughly with clear water. The waste water will be drained out through the drain pipe.
4. Reconnect power to the unit.
The ice scoop should be washed regularly. Wash it just like any other food container.
Ice Making Parts Cleaning
During the using, periodically to clean these main system of your ice-maker.
1\Repeat above step to clean the water tank and other inner parts of the unit.
2\Especially, to the water dividing pipe on the evaporator, when the compressor and the water
pump run normally, but if there is no water flowing out from the water dividing pipe or the water flowing
is very small, please discharge this water dividing pipe to clean carefully. Clean each little holes on the
water dividing pipe displayed in the following illustration, make sure each hole is not clogged by
something, then install back to the original location.
