15
Automatic water supplying symbol
Arrow of symbol flashes, means the water is flowing
into the water tank.
If this whole symbol keeps displaying, means no main water supplying at
present.
Ice-cube symbol, when it rotate, means unit is making the ice cube; and it flashes, means the
unit is in ice harvest process.
℃
Centigrade(ambient temperature
）
H
unit of hour
（
setting the timer
）
M
unit of minute
（
ice-making setting and countdown time
）
1. After completing the connection of the main water supplying hose with the unit, plug on the main
power supply plug. Then press “ON/OFF” button on the control panel to begin the ice making cycle.
The unit ON/OFF state symbol will keep lighting on, the left number in the LCD display window
displays the present ambient temperature, and the right number displays the present ice-making
setting, and the ice-cube symbol rotates. When the left number change to flash, then the number
means the countdown time to complete one ice making cycle.
2. Each ice making cycle will last about 11 to 20 minutes, depending on the ambient temperature and
the water temperature. And for the first time, according to the initial water temperature, ice-making
last time will be a little longer.
3. When the ice-making process is over, then switch to ice-harvest process. During the ice-harvest
process, the ICE cube symbol change rotating to flash. At same time, the arrow on the manual
filling water symbol will start to flash, the water will flow into the water tank again till the floating ball
of water level switch rises up to the highest position, then the water stop flowing and the whole
manual filling water symbol will disappear.
When the ice-harvest finish, the Ice-full detecting plate will rotate downward once, then recover to
the original position and enter to the next ice-making process.
If after the rotation of the Ice-full detecting plate, it is pressed by the ice cube and can’t recover to
the original position, means the the ice storage bin is full of the ice cube and it will stop making the
ice automatically.
4. When the “ICE-FULL ” symbol display is on, the unit stops running. And if you move away the ice
cube, the unit will start to make the ice cube again. But it will restart only after 3 minutes interval of
compressor running.
5. During the ice-making process, press the “+” or “-” button to adjust the ice-making process duration
period length, then to change the thickness of the ice cube. Press the “+” or “-” button, the right
digit
will flash, the default setting is zero, 1 minute will add or decrease to each ice making
process per each pressing of “+” or “-” button. After 5 second of setting, the new setting will be
remembered by the system.
