15
ignition, light the burner before placing the pan over the grill.
Flame must be turned down or off before pan removal.
Ⅳ
. Burners and grids
These parts can be removed and cleaned with appropriated products.
After cleaning,the burners and their flame distributors must be well dried
and correctly replaced.
It is very important to check that the burner flame distributor and the cap
has been correctly positioned -failure to do so can cause serious problems .
In appliances with electric ignition keep the electrode clean so that the
sparks always strike.
Note: to avoid damage to the electric ignition don’t use it when the
burners are not in place.
Ⅴ
.Correct placement of the burners
It is very important to check that the burner flame spreader“F”and the
cap“C”have been correctly positioned (see figs.1 and 2).
Failure to do so can cause serious problems.Should the burner caps not
be placed properly over the burner,this could cause irregular flame and
could cause a hazard.
In appliances with electric ignition,check that the electrode“S”(fig.1)is
always clean to trouble-free sparking.
The ignition plug must be very carefully cleaned.