11
HOSE INSTALLATION
1. Place the metal hose clamp on the
hose end.
2. Connect the hose to the oven inlet and
tight the hose clamp.
3. Place the other clamp on the opposite hose end and tight the hose
clamp after connecting it to the pressure regulator.
4. Bolt the pressure regulate to the gas cylinder counterclockwise.
5. After the installation, check if there is any gas leak, using soap or
liquid detergent foam.
6. Don’t allow the PVC hose to come close to the heat source, such as
the back of oven etc
ATTENTION
1. Always check the validity of the pressure regulator.
2. The power cord doesn't pass on the back of oven near high heat source .
Hose and regulator should be replaced every 5 years depending on the
condition or advice from your installer.
3. If possible, install the gas cylinder outside the kitchen, in a place
protected / concealed and with adequate air flow.
CARE WITH FOOD AND COOKWARE
1. To handle or remove food, use cooking gloves to avoid getting burnt.
Metal Hose Clamp