EN
sigfox TEMP- Guide utilisateur / User guide version V2.0.1
77
Page
of 84
FR
6.2.3 DIN-Rail fixing
This system, integrated into the casing, enables the product to be fastened onto a standard 35 mm rail.
• To fit the casing, place the upper inserts on the rail and lower the product to clip it into position.
• To remove the product, pull the unlocking lever down and disengage the product from the rail.
1
2
Locking onto the DIN-Rail
Unlocking
6.3. Installation of the remote prob
To ensure an optimal performance of the remote probe, please, follow the installation recommendations here-after:
• Install the contact probe on the surface to monitor
• Place the probe to be sure that it is the reinforced section that is in contact with hot surfaces and not the wire (cf illustration hereunder)
• Use the appropriate fixation for the monitored surface (thermal paste, heat resistant collars etc.)
WARNING
: the probe must be manipulated at room temperature, risk of damage if handled in negative temperatures or above 90°C
Summary of Contents for ARF8181BA2D
Page 5: ...FR sigfox TEMP Guide utilisateur User guide version V2 0 1 5 Page of 84 FR FRANCAIS...
Page 7: ...FR sigfox TEMP Guide utilisateur User guide version V2 0 1 7 Page of 84 FR...
Page 43: ...EN sigfox TEMP Guide utilisateur User guide version V2 0 1 43 Page of 84 FR ENGLISH...
Page 45: ...EN sigfox TEMP Guide utilisateur User guide version V2 0 1 45 Page of 84 FR...