EN
sigfox TEMP- Guide utilisateur / User guide version V2.0.1
74
Page
of 84
FR
5.3. Closing the casing
Once previous stages have been carried out, you can close the casing of the sigfox TEMP
Procedure:
1. Make sure that the seal is properly positioned on the base
2. Clip the electronic board onto the casing’s base. Make sure that the fastening clip is properly locked into the board’s fitting.
3. Insert the upper part of the casing. Inside this part there are guide rails for the board. Make sure that the board is properly positioned
within these guides.
4. Once the board is in position, lower the upper cover and lock it onto the casing’s base. Strong pressure will enable both parts to be clipped
together and will enable protection level IP67 to be ensured.
5. Finish the assembly by locking the packing gland’s nut in position
Seal
Fastening clip
Fitting
Locking clips for
the upper casing
Packing gland nut
1
2
3/4
5
Summary of Contents for ARF8181BA2D
Page 5: ...FR sigfox TEMP Guide utilisateur User guide version V2 0 1 5 Page of 84 FR FRANCAIS...
Page 7: ...FR sigfox TEMP Guide utilisateur User guide version V2 0 1 7 Page of 84 FR...
Page 43: ...EN sigfox TEMP Guide utilisateur User guide version V2 0 1 43 Page of 84 FR ENGLISH...
Page 45: ...EN sigfox TEMP Guide utilisateur User guide version V2 0 1 45 Page of 84 FR...