Adeunis RF ARF8180AA, User Manual

Page: 63 / 86

EN
LoRaWAN TEMP - Guide utilisateur / User guide version V2.0.1
63 of 86
3.4. Description of the registers
On switching on the product works according to the last saved configuration (Factory Configuration if it is the first start, or if this configuration
has not been changed). Command Modification TTY<n>=<M> allows you to change the content of the registers: <n> representing the number
of the register and <m> the value to be assigned. This latter is either a decimal value or a hexadecimal value consistent with the «encoding»
column of the tables below.
Examples:
• ATS300=6 assigns the decimal value 6 in register 300
• ATS320=2 assigns the hexadecimal value 0x02 in register 320
It is imperative to save the parameters with the command AT&W before exiting the Command mode otherwise all changes will be lost.
IMPORTANT: The registers that are not documented (that can appear in the list following the AT/S command) in the paragraphs that follow are
reserved and must not be changed.
3.4.1 Function registers
The list of registers below allows you to change the behavior of the product application.
Register Size
(bytes) Description Coding Details
S300 1 Transmission period of the Keep Alive
frame Decimal Default: 144
Min/max: 1 to 255
Unit:
x 10min if S306=1
x 20s if S306=2
S301 1 Transmission period of data sensors Decimal Default: 6
Min/max: 0 à 255
Unit:
x 10min if S306=1
x 20s if S306=2
The value 0 means no periodic sending, therefore event
operation
S303 1 Confirmed mode activation Decimal Default : 0 (deactivated)
Values : 0 (deactivated) to 1 (activated)
S304 2 PIN code Decimal Default : 0 (disabled)
Min/max : 0 to 9999
PIN code used with ATPIN command.
Value 0 disables the PIN code.
IMPORTANT: The product does not have a mechanism
to unlock the PIN code if it is activated and the code is
forgotten.
S306 1 Global operation Decimal Default: 0
Allows the product to be switched into one of the follow-
ing modes:
• 0: PARK mode
• 1: Production mode
• 2: TEST mode
• 3: REPLI mode
S320 1 Identifier of the probe 1 Hexadecimal Default: 0x00
Bits 0 to 3: Reserved
Bits 4 to 7: Identifier (free to use)