Page 10
Manual SVL 4G Weblogger
Adesys B.V. | Wateringen
5
Output switching by SMS
With the SVL, the output channel can be switched by means of an SMS message. The SMS message should
be structured as follows:
#<Command><parameter1><parameter2>#
• Command
= O (Output).
• Parameter1
= A (Active) of I (Idle) of P (Puls schakelen, default: 2 seconden active).
• Parameter2
= Ingangsnummer.
Note: The output number is not the same as the relay number. Relay number 1 is output 5.
Example SMS message to relay 1:
•
Output 5 active: #OA5#
•
Output 5 Idle: #OI5#
•
Output 5 with default Pulse: #OP5#
•
Output 5 with 8s Pulse: #OP58#
•
Output 5 with 20s Pulse: #OP520#
Figure 3 Connectsticker