Rapid Eye Remote Video Unit Installation and Setup Guide
3.0 Installing the Remote Video Unit
13
To configure the IP address:
1.
Connect a null modem cable (9-pin or 25-pin female) from either COM1
or COM2 of your workstation to the RS-232 Port 2 connector (9-pin
female) at the rear of the Remote Video Unit.
☞
Note: For a null modem wiring diagram, refer to Appendix D:
Full Duplex Null Modem Wiring Diagram.
&20 RU &20
56 3RUW
:RUNVWDWLRQ
5HPRWH 9LGHR 8QLW
Figure 5: Null Modem Cable Connection
2.
Start a Terminal program such as Windows Hyper Terminal:
•
In Windows 95, select [Start], [Programs], [Accessories],
[HyperTerminal]. Click the Hypertrm.exe icon.
•
In Windows 98, select select [Start], [Programs], [Accessories],
[Communications], [HyperTerminal]. Click the Hypertrm.exe icon.
•
In Windows NT, select [Start], [Programs], [Accessories],
[Hyperterminal], [HyperTerminal].
3.
In the Connection Description dialog box, enter Rapid Eye (or similar)
in the Name box and click [OK].
