STAN07-210324-Rev005-UM-en
18
The following diagram shows the procedure:
Menu backlight [bLIGHt]
In this menu item, settings for the backlight, the background colour and the background colour for
warning when exceeding or falling below target values (HI/LO) can be made.
To set the parameters for the backlight, hold the
key for more than one second until the display
shows [PLUPrO]. Then press the ► key until the display shows [bLIGht].
The following diagram shows the procedure:
Basic setting of the backlight [LiGH]
Press the
key when [bLIGHt] appears in the display. [LiGH] appears in the display.
For the backlight, there are three different programming options:
OF
Backlight always off.
ON
Backlight always on.
AU
Backlight when loaded. Switches off when not in use after 5
seconds.
By means of the ▲ and ▼ keys, select the desired setting and confirm your choice with
to change
to the next menu item or press the
key to return to the previous menu item.
The following diagram shows the procedure:
Basic setting of background colour [CoLr]
Press the
key twice when [bLIGht] appears in the display. [CoLr] appears in the display.
Summary of Contents for STAN07
Page 35: ...STAN07 210324 Rev005 UM en 34...
