© 2020 Addvalue Innovation Pte Ltd. All rights reserved.
SABRE™ RANGER 5000 Quick Start Guide
15
Figure 20
4. Align the bracket wall
to the bracket body
. See fi gure 19. Notice the upper
holes on the bracket wall align to the slots on the bracket wall and the lower holes align
to the holes below the slots of the bracket body.
5. Use the washers (4x) , the split washers (4x)
and the socket head screws
(M8 x 14mm - 4x)
to assemble to .
NOTE
: Do not fully tighten the screws to assemble
to
with a hex L-key, fasten the
screws fi nger tight only as you need to adjust its actual position according to the satellite
location later.
Before mounting the terminal, ensure that the azimuth is correct by using a compass.
For example: North has an azimuth of 0°, East 90°, South 180° and West 270°.
1. Locate a vertical pole or column to mount the SABRE™ RANGER 5000 terminal.
NOTE
: The mounting bracket is designed to be mounted on a 1 to 3 inch diameter pole.
2. Use the supplied washers, socket head cap screws (M8 x 120mm), and the saddle
clamps to mount the pre-assembled terminal on the pole.
7. MOUNT THE TERMINAL ON A POLE
Summary of Contents for wideye SABRE RANGER 5000
Page 1: ...SABRE RANGER 5000 Ver 2 0 Date 20 November 2020...
Page 31: ......
Page 32: ...Part Number 74B00140002...
