Addvalue Innovation wideye SABRE RANGER 5000, Quick Start Manual

Page: 16 / 32

SABRE™ RANGER 5000 Quick Start Guide
© 2020 Addvalue Innovation Pte Ltd. All rights reserved.
14
6. FIX OPTIONAL MOUNTING BRACKET TO
SABRE™ RANGER 5000
1. See fi gure 19 above. Place Sabre™ Ranger 5000 terminal with its front face on a fl at
surface.
2. Attach the bracket body on the rear of Sabre™ Ranger 5000 terminal.
NOTE : There are fi ve holes at the base of the bracket body. The wire loop-hole as
shown on the enlarged view should be placed along the upper edge of the terminal. See
fi gure 19 and its enlarged view.
3. Align the four holes, and fasten to Sabre™ Ranger 5000 terminal using the
washers (4x) and the socket head cap screws (M8 x 14mm - 4x) with a hex L-key.
Figure 19