Addvalue Innovation wideye SABRE RANGER 5000, Quick Start Manual

Page: 10 / 32

SABRE™ RANGER 5000 Quick Start Guide
© 2020 Addvalue Innovation Pte Ltd. All rights reserved.
8
RS232/RS485 – user port
This is a user confi gurable port. The user can confi gure this port to be any of the following:
• RS232
• RS485 – full duplex
• RS485 – half duplex
RS232
Use Belden cable no. 9533 or equivalent for 3-wire RS232 (RX, TX, GND) or Belden
cable no. 9535 or equivalent for 5-wire RS232 (RX, TX, RTS, CTS, GND). Cable length
is limited to 10 metres.
• Connect the wires as shown below.
NOTE : The sample wires below are used for reference. You may use different colour
wires that met the electrical specifi cations.
Black wire - terminal block 10 (GND)
Red wire - terminal block 8 (RS232-TX)
White wire - terminal block 11 (RS232-RX)
NOTE : If you use the Belden cable no. 9535 for 5-wire RS232 (RX, TX, RTS, CTS,
GND), refer to fi gure 7 for the wire connections to the terminal block.
Figure 11