Addvalue Innovation SABRE RANGER 5000 User Manual Download Page 59

Page: 59 / 65

SABRE

™

RANGER 5000 User Guide

MENU OVERVIEW

SETTINGS

- Reboot

- Factory Reset

- Terminal Info

- Logs
  - Event
  - Error

REBOOT

Navigate

Menu > Settings > Reboot

to reboot and switch the terminal to Normal Mode.

FACTORY RESET

Navigate to

Menu > Settings > Factory Reset

to factory reset the terminal.

Enter security code for factory reset (Default: 0000).

NOTE:

By default, the security code is 0000. Once you change the Terminal PIN, the Factory Reset password is
changed to match the Terminal PIN.

TERMINAL INFO

Navigate to

Menu > Settings > Terminal Info

to check for the detail of the terminal.

You may need to supply this information when contacting your service provider.

LOGS

Navigate to

Menu > Settings > Log

to view the Event Log or Error Log of the terminal.

Click

Export all Logs

in order to export the logs.

Summary of Contents for SABRE RANGER 5000
































































Search results

Summary of Contents for SABRE RANGER 5000

Reviews:

Related manuals for SABRE RANGER 5000

Brands by name

Popular brands

Addvalue Innovation SABRE RANGER 5000, User Manual

Search results

Summary of Contents for SABRE RANGER 5000

Reviews:

Related manuals for SABRE RANGER 5000

Brands by name

Popular brands