SABRE
™
RANGER 5000 User Guide
© 2017 Addvalue Innovation Pte Ltd. All rights reserved.
57
11.3.6 SMS Configurations
Navigate to
Menu > Settings > SMS Configurations > Remote Control
to configure the SMS
remote control features.
By default, it allows all phone number to remotely control your terminal.
i. Select
Enabled
to enable the SMS remote control feature.
ii. Select
Allow only listed numbers
to allow only specific numbers.
You can configure up to 5 phone numbers.
iii. Tick the
ACK SMS remote command
to receive an acknowledgement SMS from the terminal.
This may incur airtime charges depending on the service provider.
iv. Enter the SMS password for the remote control.
v. Click
update
for the feature to take effect.
NOTE:
Refer to Sabre RANGER 5000 SMS Remote Control Feature User Guide for the SMS
command.
Figure 70
11.3.7 Language
Navigate to
Menu > Settings > Terminal Info > Language
to select the desired language.
The default language is English.
English and Chinese Simplified are available for your selection.
11.3.8 Support
Navigate to
Menu > Settings > Terminal Info > Support
to get the contact information of your
service provid
er’s support team.
11.3.9 About
Navigate to
Menu > Settings > Terminal Info > About
to get the contact information of the
manufacturer.
