Addi-Data APCI-1710, Technical Description

Page: 55 / 84

Functions of the board APCI-1710
54
Example:
The incremental transmitters are programmed with reference logic in the
function modules 1 to 4. The corresponding I/O function range for the
“incremental transmitter” will be copied into the therefore allocated places
of the function modules.
The following I/O range is built:
Table 9-2: I/O range
IORD / IOWR
D31...D24 D23...D16 D15.....D8 D7.......D0
BYTES HIGHBYTE MIDHIGHBYTE MIDLOWBYTE LOWBYTE
BASE+0 Incremental counter 1
BASE +59 Incremental counter 1
BASE +60 bis +63 Function module 1 - Info
SCxx
BASE+64 Incremental counter 2
BASE+ 123 Incremental counter 2
BASE + 124 bis + 127 Function module 2 - Info SCxx
BASE+128 Incremental counter 3
BASE+187 Incremental counter 3
BASE +188 bis +191 Function module 3 - Info SCxx
BASE+192 Incremental counter 4
BASE+251 Incremental counter 4
BASE +252 bis +255 Function module 4 - Info SCxx
SC: Incremental counter
xx: Number of version, e.g. SC23 Version 2.3
All settings on the board are realized through the software (AP), through the
connector assignment or through a reprogramming of the function module
(no jumper on the board).