Addi-Data APCI-1710 Technical Description Download Page 4

Page: 4 / 84

WARNING

In case of wrong uses and if the board is not used for

the purpose it is intended:

♦

people may be injured,

♦

the board, PC and peripheral may be

destroyed,

♦

the environment may be polluted

♦

Protect yourself, the others and the environment!

♦

Read carefully the safety precautions

(yellow leaflet).

If this leaflet is not with the documentation, please contact
us and ask for it.

♦

Observe the instructions of the manual.

Make sure that you do not forget or skip any step. We are
not liable for damages resulting from a wrong use of the

board.

♦

Used symbols:

IMPORTANT!

designates hints and other useful information.

WARNING!

It designates a possibly dangerous situation.
If the instructions are ignored the board, PC and/or peripheral may
be destroyed.

Summary of Contents for APCI-1710





















































































Search results

Summary of Contents for APCI-1710

Reviews:

Related manuals for APCI-1710

Brands by name

Popular brands

Addi-Data APCI-1710, Technical Description

Search results

Summary of Contents for APCI-1710

Reviews:

Related manuals for APCI-1710

Brands by name

Popular brands