Technical description Chapter 5
PA 7300
19
Fig. 5-7: Configuring a new board
All boards you can registrate are listed on the left. Select the wished board. (The
corresponding line is highlighted).
On the right you can read technical informations about the board(s).
Activate with "OK"; You come back to the former screen.
Clear:
You can delete the registration of a board. Select the board to be deleted and
click on "Clear".
Set:
Sets the parametered board configuration. The configuration should be set
before you save it.
Cancel:
Reactivates the former parameters of the saved configuration.
Default:
Sets the standard parameters of the board.
More information:
You can change the board specific parameters like the identfier string, the COM
number, the operating mode of a communication board, etc...
If your board does not support these informations, you cannot activate this button.
