PA 7300
Technical description Chapter 4
6
4 TECHNICAL
DATA
4.1
Electromagnetic compatibility (EMC)
The board has been subjected to EMC tests in an accredited laboratory in
accordance with the norms EN50082-2, EN55011, EN55022.
The board complies with the limit values set by the norm EN50082-2 as follows:
True
value Set
value
ESD ................................................................... 4 kV
4 kV
Fields................................................................. 10 V/m
10 V/m
Burst .................................................................. 4 kV
2 kV
Conducted radio interferences .......................... 10 V
10 V
WARNING!
The EMC tests have been carried out in a specific appliance
configuration. We guarantee these limit values
only
in this
configuration.
Consider the following aspects:
- Use
properly shielded lines
- your test program must be able to detect operation errors.
-
your system must be set up
so that you can find out what caused errors.
4.2
Physical set-up of the board
The board is assembled on a 2-layer printed circuit card.
Approximate card dimensions
(with components)
with SI modules
Lenght:
125 mm
Max. height:
18 mm
Breadth:
76 mm
Weight:
Max. 108 g
Installation in:
AT slot
Connection to the peripheral:
25-pin SUB-D male connector
