PA 7300
Technical description Chapter 5
16
5.3.5 Modifying the configuration after having booted the PC
You call up ADDISET with the configuration file as a parameter :
ADDISET < file name> /I
Ex.
ADDISET 1.CFG /I
ADDISET 2.CFG /I
5.3.6 Quit ADDISET
Before quitting ADDISET, verify that the name of the wished boot file appears.
5.4
Testing the functions with ADDIMON
- Insert the board in your PC
- Connect the board to its communication partner or use a short circuit
connector to make the board communicate with itself.
- Load ADDIMON
- Set the transfer parameters of the board
- Start transfer
5.4.1 Hotline protocol, faster technical support
- Insert the board in your PC
- Load ADDIMON
- If you have a problem
•
Fill out the hotline protocol
•
Print the hotline protocol and send it to our technical support
•
In this way, we can answer your questions even faster and with more
accuracy
5.5
Board configuration with ADDIREG
The ADDIREG registration program is a 32-bit program for Windows NT 4.0/ 95.
The user can registrate all hardware informations necessary to operate the
ADDI-DATA PC boards.
IMPORTANT!
If you use one or several resources of the board, you cannot start the
ADDIREG program.
5.5.1 Program
description
IMPORTANT!
Insert the ADDI-DATA boards to be registrated before starting the
ADDIREG program.
If the board is not inserted, the user cannot test the registration.
Once the program is called up, the following dialog box appears.
